Free Statistics

of Irreproducible Research!

Author's title

Author*The author of this computation has been verified*
R Software Modulerwasp_notchedbox1.wasp
Title produced by softwareNotched Boxplots
Date of computationSat, 13 Dec 2014 16:57:43 +0000
Cite this page as followsStatistical Computations at FreeStatistics.org, Office for Research Development and Education, URL https://freestatistics.org/blog/index.php?v=date/2014/Dec/13/t1418489924zbuawokkp3jcj75.htm/, Retrieved Thu, 16 May 2024 08:49:49 +0000
Statistical Computations at FreeStatistics.org, Office for Research Development and Education, URL https://freestatistics.org/blog/index.php?pk=267236, Retrieved Thu, 16 May 2024 08:49:49 +0000
QR Codes:

Original text written by user:
IsPrivate?No (this computation is public)
User-defined keywords
Estimated Impact67
Family? (F = Feedback message, R = changed R code, M = changed R Module, P = changed Parameters, D = changed Data)
-       [Notched Boxplots] [BOXPLOT PAPER 201...] [2014-12-13 16:57:43] [ca907db95fc0b179b22bb0898c34dff4] [Current]
Feedback Forum

Post a new message
Dataseries X:
30 26.56
17 20.16
24 30.24
20 18.56
25 23.36
20 22.16
27 23.76
18 18.8
28 29.52
21 25.44
27 31.84
22 17.52
28 29.52
25 24.16
21 24
22 18.16
28 25.52
20 28.96
29 23.36
20 28.16
20 24.56
23 21.44
18 22.24
18 24.4
19 20.64
25 25.76
25 27.76
25 21.04
24 19.44
19 20.16
26 16.56
10 24.64
17 15.36
13 29.12
17 21.76
30 23.76
4 22.56
16 23.84
21 26
22 21.76
20 25.04
22 23.36
23 20.24
16 19.04
0 30.72
18 26.56
25 17.92
18 21.12
18 25.36
24 17.84
29 25.04
15 12.24
22 24.32
23 24.96
24 20.96
22 18.96
15 19.84
17 18.24
20 23.84
27 31.84
26 17.92
23 23.36
23 23.6
15 24.24
26 26.96
22 12.56
18 20.16
15 12.56
22 17.52
27 19.76
10 15.92
20 23.84
17 26.64
23 21.44
19 22.32
13 25.12
27 26.96
23 17.52
16 24.56
25 19.52
2 24.16
26 28.4
20 24.32
22 26.64
24 12.96
23 6.96
22 20.32
21 28.96
25 28.56
27 27.36
23 30.56
23 25.76
18 21.36
18 29.44
23 23.52
19 16.96
15 20.16
20 25.92
16 21.76
25 22.56
25 23.2
19 25.84
19 23.6
16 23.68
19 19.92
19 20.24
23 27.76
21 13.76
22 29.44
19 25.76
20 28.4
3 24.4
23 28.24
14 24.96
23 26.16
20 28.24
15 21.76
13 18.72
16 22.96
7 23.6
24 29.2
17 15.84
24 25.6
24 29.2
19 26.96
28 30.32
23 24.96
19 27.36
23 25.76
25 24.64
25 24.64
20 21.36
16 30.56
20 12.16
25 30.56
25 23.6
23 30.8
17 21.76
20 20.4
16 15.76
23 24.4
12 19.04
24 26.16
11 19.84
14 22.96
23 29.04
18 28.4
29 19.76
16 24.96
19 30.88
16 27.36
23 29.44
19 30.48
4 29.68
20 30.56
20 20.56
4 15.2
24 7.2
16 21.76
3 18.72
24 21.36
23 28.4
17 28.16
20 22.48
22 25.76
19 21.36
24 18.96
19 19.12
27 21.12
22 12.32
23 23.36




Summary of computational transaction
Raw Inputview raw input (R code)
Raw Outputview raw output of R engine
Computing time1 seconds
R Server'George Udny Yule' @ yule.wessa.net

\begin{tabular}{lllllllll}
\hline
Summary of computational transaction \tabularnewline
Raw Input & view raw input (R code)  \tabularnewline
Raw Output & view raw output of R engine  \tabularnewline
Computing time & 1 seconds \tabularnewline
R Server & 'George Udny Yule' @ yule.wessa.net \tabularnewline
\hline
\end{tabular}
%Source: https://freestatistics.org/blog/index.php?pk=267236&T=0

[TABLE]
[ROW][C]Summary of computational transaction[/C][/ROW]
[ROW][C]Raw Input[/C][C]view raw input (R code) [/C][/ROW]
[ROW][C]Raw Output[/C][C]view raw output of R engine [/C][/ROW]
[ROW][C]Computing time[/C][C]1 seconds[/C][/ROW]
[ROW][C]R Server[/C][C]'George Udny Yule' @ yule.wessa.net[/C][/ROW]
[/TABLE]
Source: https://freestatistics.org/blog/index.php?pk=267236&T=0

Globally Unique Identifier (entire table): ba.freestatistics.org/blog/index.php?pk=267236&T=0

As an alternative you can also use a QR Code:  

The GUIDs for individual cells are displayed in the table below:

Summary of computational transaction
Raw Inputview raw input (R code)
Raw Outputview raw output of R engine
Computing time1 seconds
R Server'George Udny Yule' @ yule.wessa.net







Boxplot statistics
Variablelower whiskerlower hingemedianupper hingeupper whisker
NUMERACYTOT1018212430
TOT3212.1620.1623.6826.631.84

\begin{tabular}{lllllllll}
\hline
Boxplot statistics \tabularnewline
Variable & lower whisker & lower hinge & median & upper hinge & upper whisker \tabularnewline
NUMERACYTOT & 10 & 18 & 21 & 24 & 30 \tabularnewline
TOT32 & 12.16 & 20.16 & 23.68 & 26.6 & 31.84 \tabularnewline
\hline
\end{tabular}
%Source: https://freestatistics.org/blog/index.php?pk=267236&T=1

[TABLE]
[ROW][C]Boxplot statistics[/C][/ROW]
[ROW][C]Variable[/C][C]lower whisker[/C][C]lower hinge[/C][C]median[/C][C]upper hinge[/C][C]upper whisker[/C][/ROW]
[ROW][C]NUMERACYTOT[/C][C]10[/C][C]18[/C][C]21[/C][C]24[/C][C]30[/C][/ROW]
[ROW][C]TOT32[/C][C]12.16[/C][C]20.16[/C][C]23.68[/C][C]26.6[/C][C]31.84[/C][/ROW]
[/TABLE]
Source: https://freestatistics.org/blog/index.php?pk=267236&T=1

Globally Unique Identifier (entire table): ba.freestatistics.org/blog/index.php?pk=267236&T=1

As an alternative you can also use a QR Code:  

The GUIDs for individual cells are displayed in the table below:

Boxplot statistics
Variablelower whiskerlower hingemedianupper hingeupper whisker
NUMERACYTOT1018212430
TOT3212.1620.1623.6826.631.84







Boxplot Notches
Variablelower boundmedianupper bound
NUMERACYTOT20.2750462809692121.724953719031
TOT3222.901883008240123.6824.4581169917599

\begin{tabular}{lllllllll}
\hline
Boxplot Notches \tabularnewline
Variable & lower bound & median & upper bound \tabularnewline
NUMERACYTOT & 20.275046280969 & 21 & 21.724953719031 \tabularnewline
TOT32 & 22.9018830082401 & 23.68 & 24.4581169917599 \tabularnewline
\hline
\end{tabular}
%Source: https://freestatistics.org/blog/index.php?pk=267236&T=2

[TABLE]
[ROW][C]Boxplot Notches[/C][/ROW]
[ROW][C]Variable[/C][C]lower bound[/C][C]median[/C][C]upper bound[/C][/ROW]
[ROW][C]NUMERACYTOT[/C][C]20.275046280969[/C][C]21[/C][C]21.724953719031[/C][/ROW]
[ROW][C]TOT32[/C][C]22.9018830082401[/C][C]23.68[/C][C]24.4581169917599[/C][/ROW]
[/TABLE]
Source: https://freestatistics.org/blog/index.php?pk=267236&T=2

Globally Unique Identifier (entire table): ba.freestatistics.org/blog/index.php?pk=267236&T=2

As an alternative you can also use a QR Code:  

The GUIDs for individual cells are displayed in the table below:

Boxplot Notches
Variablelower boundmedianupper bound
NUMERACYTOT20.2750462809692121.724953719031
TOT3222.901883008240123.6824.4581169917599



Parameters (Session):
par1 = grey ;
Parameters (R input):
par1 = grey ;
R code (references can be found in the software module):
z <- as.data.frame(t(y))
bitmap(file='test1.png')
(r<-boxplot(z ,xlab=xlab,ylab=ylab,main=main,notch=TRUE,col=par1))
dev.off()
load(file='createtable')
a<-table.start()
a<-table.row.start(a)
a<-table.element(a,hyperlink('overview.htm','Boxplot statistics','Boxplot overview'),6,TRUE)
a<-table.row.end(a)
a<-table.row.start(a)
a<-table.element(a,'Variable',1,TRUE)
a<-table.element(a,hyperlink('lower_whisker.htm','lower whisker','definition of lower whisker'),1,TRUE)
a<-table.element(a,hyperlink('lower_hinge.htm','lower hinge','definition of lower hinge'),1,TRUE)
a<-table.element(a,hyperlink('central_tendency.htm','median','definitions about measures of central tendency'),1,TRUE)
a<-table.element(a,hyperlink('upper_hinge.htm','upper hinge','definition of upper hinge'),1,TRUE)
a<-table.element(a,hyperlink('upper_whisker.htm','upper whisker','definition of upper whisker'),1,TRUE)
a<-table.row.end(a)
for (i in 1:length(y[,1]))
{
a<-table.row.start(a)
a<-table.element(a,dimnames(t(x))[[2]][i],1,TRUE)
for (j in 1:5)
{
a<-table.element(a,r$stats[j,i])
}
a<-table.row.end(a)
}
a<-table.end(a)
table.save(a,file='mytable.tab')
a<-table.start()
a<-table.row.start(a)
a<-table.element(a,'Boxplot Notches',4,TRUE)
a<-table.row.end(a)
a<-table.row.start(a)
a<-table.element(a,'Variable',1,TRUE)
a<-table.element(a,'lower bound',1,TRUE)
a<-table.element(a,'median',1,TRUE)
a<-table.element(a,'upper bound',1,TRUE)
a<-table.row.end(a)
for (i in 1:length(y[,1]))
{
a<-table.row.start(a)
a<-table.element(a,dimnames(t(x))[[2]][i],1,TRUE)
a<-table.element(a,r$conf[1,i])
a<-table.element(a,r$stats[3,i])
a<-table.element(a,r$conf[2,i])
a<-table.row.end(a)
}
a<-table.end(a)
table.save(a,file='mytable1.tab')